As a user, you cannot control bounces, but it is important that you gain an understanding of what bounces are, how a subscriber's email address becomes "bounced", and how the application deals with those bounces.
What is an Email Bounce?
Bounces are messages that ISPs send back to Critical Impact to explain why they can't (or won't) deliver your email to the email address you sent it to. Once you send an email, the recipient's email server either accepts your message, or "bounces" it. If the recipient's email server accepts your message, the recipient's email address remains active in Critical Impact. If the recipient's email server rejects your message, we consider this a bounce. There are two kinds of bounces - one is temporary and one is permanent. We'll explain how each of those work in the next section.
The Soft Bounce
A soft bounce (temporary bounce) occurs when the email address is valid, but the message couldn't be delivered to it, most likely due to a temporary encumbrance.
A soft bounce occurs when the recipient's email server rejects your email message due to a temporary condition that exists on the receiver's side, e.g. perhaps their inbox is full and not accepting any new messages. If a recipient mail server doesn't officially bounce your message and defers its delivery instead, Critical Impact will retry the delivery at a staggered interval until the server either accepts the message, the message is officially bounced for a specified reason, or 72 hours has passed.
Despite the multiple attempts to reach the recipient mail server, these attempts only equate to one soft bounce. The following table describes the possible causes of a soft bounce.
It is important to note that soft bounces are not controlled by our system or by you, our customer. Soft bounces are entirely dictated by the intended recipient's email servers and those mail servers' configurations.
Cause
|
Definition
|
Possible Cautions and Resolutions
|
---|---|---|
Inactive Email Account |
Address is temporarily unavailable as recipient's mailbox is inactive or temporarily disabled |
The subscriber's email account is temporarily inactive or disabled. Mailboxes can be disabled for several reasons, including infrequent use, change of address, delinquency or dispute. These errors could be temporary or permanent. Recommended actions include sending messages to these subscribers in the short term to monitor acceptance, and then to contact the subscriber through other methods to confirm address, if delivery issues persist. |
Temporary Domain Failure | Temporary failure at the receiving domain | The subscriber's mailbox is not currently accepting messages. This is a temporary deliverability issue that should be resolved prior to future sends. Continue to monitor deliverability for this subscriber. Consider contacting this subscriber through alternative means if these deliverability issues persist. |
Other | Mailbox temporarily unavailable or indecipherable bounce message received | The subscriber's mailbox is not currently accepting messages. This is a temporary deliverability issue that should be resolved prior to future sends. Continue to monitor deliverability for this subscriber. Consider contacting this subscriber through alternative means if these deliverability issues persist. |
Mailbox Full |
Recipient's mailbox is full or has exceeded storage allocation |
Your recipient's mailbox is full or it has exceeded it's storage allocation. The could be caused by infrequent use, a temporary change in email checking habits, or an address change. Mailbox full errors should serve as a warning sign. Consider contacting the subscriber through alternative means to confirm that you are mailing to a valid and frequently checked address. |
Soft Bounces can also be caused by poor sender reputation and/or issues stemming from too many bounces, too many complaints, or sending SPAM. This type of soft bounce is called a "block bounce". It occurs when the email server rejects your message due to filtering issues, such as URL blocks, complaints, lack of proper authentication, or the domain or IP address is found on a blacklist utilized by the receiving domain. A subscriber who receives a block bounce will be re-tried in the next email send. The following table describes the causes of a block bounce.
Cause
|
Definition
|
---|---|
Complaint | Your email is blocked due to complaints |
Blacklist | IP address is on a blacklist |
Content | Message was filtered due to content |
URL Block |
Emails containing your URLs are blocked |
Authentication | Message lacks required authentication |
Soft bounces can also be caused by technical issues. This flavor of soft bounce, also called a technical bounce, occurs when the recipient's email server rejects your message due to technical errors, such as a data format or network errors. When a subscriber experiences a technical bounce they will be re-tried in the next email send. The following table describes the causes of a technical bounce.
Cause
|
Definition
|
---|---|
Server Too Busy | Receiving email server is temporarily overwhelmed with delivery attempts from you and other senders |
Data Format Error | Email is rejected due to formatting or line length errors |
Network Error |
Connection lost or timed our during delivery line length errors |
The Hard Bounce
A hard bounce occurs when the email server rejects your message due to permanent conditions (this typically results when an email address no longer exists, or is inactive). No more attempts are made to send this email campaign to this subscriber, and the subscriber will be automatically unsubscribed from all future email attempts. While this model suits most cases, certain ISPs change from time-to-time based on how they handle spam and a number of other deliverability items.
The following table describes the possible causes of a hard bounce.
Cause
|
Definition
|
Possible Cautions and Resolutions
|
---|---|---|
Domain Unknown | Domain is bad or non-existent | Sending to unknown domains is a result of poor data capture methods, old data, or questionable data sources. Sending to old lists can also increase the likelihood of mailing to dead domains, as domains that are no longer active will be represented on old lists. To avoid receiving a high number of "Domain Unknown" errors, we recommend sending a test send to 10% of your regular mailing volume. In doing so, you can assess the results from the test send without exceeding the acceptable bounce and complain rates and make a reasonable risk assessment before proceeding with a larger send. |
User Unknown | Address is invalid and/or failure is permanent per bounce message | Industry statistics indicate that up to 33% of email addresses become invalid over a 12 month period. Receiving the User Unknown error indicates that the address is no longer active or has never been an active email address. Because of the high rate of turnover of email addresses, sending to subscribers on a regular basis will decrease the possibility of a sudden spike on a specific campaign. If mailing to an old subscriber list, we recommend sending a random 10% test to avoid a sudden increase in bounces. This error could also be the result of poor data capture methods. If this is the case, we recommend requiring subscribers to use double opt-in |
Bad Address Syntax
|
Email address invalid
|
The email is not in a correct syntax. For example, you may have left out the "@" symbol or didn't include a domain name (like "yourdomaincom" instead of "yourdomain.com"). Check your email address syntax and correct any errors you see. |
High Unknown Address Percentage
|
Email is blocked due to the high quantity/percentage of unknown or inactive addresses on your list |
The subscriber's ISP has flagged your IP address for sending too many messages that were unknown or inactive. The ISP sees that you sent emails to people that didn't accept them. To improve this, see the section on Best Practices.
|
Blocked by recipient based on sending domain
|
Email is blocked due to the recipient mail server blocking the message based on the mail header of the message |
The subscriber's mail server has been configured to specifically block messages based on the sending domain of your account.
|
Other
|
Address is invalid and/or failure is permanent per bounce message |
Bounce Tracking
We track your bounces in the tracking area of the application. To access your bounce tracking data, follow these steps:
- Click the Reports folder.
- Click Custom Reports.
- Select Display All Hard and Soft Bounces by Date.
- Click Run Report
We take bounces very seriously. Poor deliverability from any of our customers damages the reputation of the company and, by extension, all of our customers. Therefore, the Sending Guidelines and Thresholds are in place to prevent abuse of our email system and to ensure our clients practice permission-based, opt-in email. We continue to lead the industry in deliverability rates - due in part to our commitment to, enforcement of, and client consultation on permission marketing best practices.
Comments
0 comments
Please sign in to leave a comment.